Urgent leak or storm damage? Call 01502 441129 - answered day and nightUrgent leak? Call 01502 441129
Lowestoft Roofing Specialists
01502 441129 Get a Quote →
Emergency Roof Repairs

Emergency Roof Repairs in Lowestoft

Active leaks, storm damage, slipped tiles, lifted ridge tiles and failed flashings all need attention before water gets further into the roof structure. We cover Lowestoft and the surrounding villages.

Urgent leak or storm damage?

Call any time. Calls are answered day and night and passed straight to our roofers.

Call now: 01502 441129
What's involved

How we handle emergency roof repairs

When your roof needs attention now

Some roof problems cannot be left. An active leak during rainfall, a ridge tile lifted by the wind, a slipped slate letting water reach the timbers, or a flashing that has pulled away from a wall are all situations where leaving the roof another week risks real damage to ceilings, timbers and belongings. This page covers what to do, what to expect, and how the repair process works for emergency roof situations.

How to tell whether a roof problem is urgent

A roof leak is urgent if water is entering the building now, if a tile or slate is missing or badly displaced, or if a ridge tile has lifted or shifted. Staining on a ceiling that has been there for months may indicate a slower problem. A ceiling that is sagging or bulging is a more serious sign - keep people out of that room. A waterlogged ceiling can come down without warning, so never poke, prod or pierce it.

Visible damage after a storm - displaced ridge tiles, missing slates, torn or lifted felt on a flat roof section, or a lead flashing that has pulled away from a chimney or wall - all point to an urgent inspection. Blocked gutters, blocked downpipes and overflowing valleys can also cause sudden internal leaks that look like a roof failure but are actually a drainage issue. Check gutters and valleys from the ground only; never climb onto a roof yourself.

What to do safely when you find a leak

The most important rule is to stay off the roof. Wet tiles and slates are extremely slippery, and working at height without the right equipment causes serious injuries every year. There is nothing a homeowner can do on the roof that is worth the risk.

Inside the property, place bowls or buckets under any drips and protect floors and furniture with towels or plastic sheeting. Move anything of value away from the affected area. Take photographs of the leak, any water damage and - from the ground - any visible roof damage. These photographs matter later, both for insurance purposes and to help the roofer understand what has happened.

On the electrics: if water is near or dripping onto a light fitting, socket, switch or any electrical fitting, do not touch it. If your consumer unit (fuse box) is dry and can be reached without going near any water, you can turn off the main switch. If there is any doubt at all about whether the consumer unit is dry and safe to approach, do not touch it - call an electrician.

Make-safe work versus permanent repair

At the inspection, the first task is usually to make the roof watertight enough to stop more water getting in. On a pitched roof this might mean securing a tarpaulin or temporary sheeting over the affected section. On a flat roof with a split or lifted membrane, a temporary cover or patch can reduce further water getting in. These measures are not the finished repair - they buy time for the permanent work to be planned and carried out properly.

Whether make-safe work is possible on the first visit depends on access. A slipped tile on a lower slope may be reachable with roof ladders. A high roof, a steep pitch or a large damaged area may require scaffolding before any work can safely be done. Scaffolding adds to the overall cost, but it is not optional where safe working at height requires it. The roofer will assess access when they inspect the roof and advise on what is needed.

After the make-safe, a proper survey of the roof structure takes place. A visible fault - a missing slate, a cracked tile, a failed lead flashing - is often the entry point, but water can travel along battens and underlay before it shows inside. Older roofs sometimes have no underlay at all, so a failed tile can let water reach the timbers directly. The roofer will check the underlay, battens and roof timbers as well as the surface fault to make sure the permanent repair deals with the actual cause.

Common emergency faults by roof type

Pitched roofs with slates: Slates are fixed by nails, not nibs. When nails corrode over time - sometimes called nail sickness - slates slip or fall. One slipped slate on a double-lapped roof does not leave a straight-through gap because the course below overlaps, but it does expose the underlay or timber to wind-driven rain. Several slipped slates in the same area suggest a wider nailing problem worth inspecting across the whole slope.

Pitched roofs with plain clay tiles: Like slates, plain clay tiles are double-lapped and individually hung on nibs over battens. A single missing tile exposes the battens and any underlay beneath them. Ridge tiles on older roofs are mortar-bedded, and the mortar cracks and loosens over time. A lifted or rocking ridge tile needs securing before wind dislodges it or it falls. Newer roofs often use dry-fix ridge systems that do not rely on mortar.

Interlocking concrete tiles: These tiles are single-lapped, which means a missing or cracked tile does leave a more direct gap than a missing plain tile. They are more common on post-war housing, and missing or cracked tiles are worth looking for from the ground after strong winds.

Flat roof sections: A split or lifted membrane lets water through. Standing water on a flat roof usually means outlets are blocked or the fall of the roof is insufficient to drain it. Both problems cause the membrane to deteriorate faster.

Flashings: Lead flashing around chimneys, dormers and where a roof meets a wall is a common point of failure. Lifted lead can sometimes be dressed back into position. Cracked or split lead needs replacing. Failed or missing mortar in the joint where the flashing sits is a separate repair but often done at the same time.

Storm damage and your buildings insurance

Storm damage to a roof is often covered by buildings insurance. If you believe your roof has been damaged in a storm, take photographs as soon as it is safe to do so, note the date, and keep any receipts for emergency work or temporary protection. Tell your insurer as soon as possible - most policies require you to report damage without unnecessary delay.

Insurers generally do not cover wear and tear itself. A claim may be declined if an assessor decides the main cause was the existing condition of the roof rather than the storm itself. Insurers typically judge whether a storm occurred by reference to recorded wind speed or rainfall for that date and location, so the date you report matters. If a claim is refused and you believe the decision is wrong, you can use the insurer's formal complaints process, and after that the Financial Ombudsman Service.

Keep wear and tear repairs separate from storm damage repairs in any receipts or correspondence. Ask your insurer what evidence they need to support your claim.

What affects the cost of an emergency roof repair

Several factors affect what an emergency roof repair costs: the extent of the visible damage, whether a full investigation is needed, the type of roof and materials, whether scaffolding or specialist access equipment is required, and whether temporary make-safe work is needed before permanent repairs can begin. A small repair on an accessible single-storey extension costs far less than the same repair on a tall or steeply pitched roof that needs a full scaffold. We can only give an accurate figure once the roof has been inspected.

What happens when you call

Calls are answered day and night and passed straight to our roofers, who ring you back to talk through what has happened and arrange a visit.

When you call, have your address and a brief description of the problem ready. When a roofer attends, they will inspect the roof safely, explain what they have found, and go through the options for making it safe and carrying out the permanent repair. There is no pressure to make a decision on the doorstep.

For emergency roof problems, contact a local roofer as soon as possible so the situation can be assessed.

Itemised quote
Materials, labour, scaffold broken out
Fixed start date
With a daily schedule

Get your free quote

No obligation · We'll call you to arrange a free visit

By submitting you agree to being contacted about your enquiry. No spam, ever.

Urgent leak or storm damage?

Call any time. Calls are answered day and night and passed straight to our roofers.

Call now: 01502 441129
Questions

What people ask first.

Most standard roof repairs in Lowestoft fall between £150 and £600. Replacing a handful of broken tiles is at the lower end, while re-bedding a full ridge line or replacing valley lead work sits at the higher end. We provide a written quote after inspection so there are no surprises.
A new roof on a typical Lowestoft semi-detached house costs between £6,000 and £12,000, fully installed including scaffold and materials. An extension or single-garage roof starts from around £1,500-£3,000. We provide a fully itemised written quote after measuring up on site.
If more than 20-25% of your tiles are cracked, slipped, or porous, the underfelt is visibly breaking down, or you've had repeated leaks in different areas over the past few years, replacement is usually more cost-effective. We'll give you an honest assessment during a free survey - we won't recommend replacement if repairs will genuinely do the job.
GRP fibreglass flat roofing in Lowestoft typically costs £70-£110 per square metre fully installed. EPDM rubber membrane sits at £60-£90 per square metre. A typical 20m² rear extension roof would cost roughly £1,400-£2,200 depending on the system chosen and any decking repairs needed.
A full replacement on a Lowestoft semi-detached house typically costs £900-£2,000 for uPVC fascias, soffits, and guttering. Detached properties or those with more complex rooflines will be at the higher end. We provide a free written quote after measuring around the property.
Chimney repointing and lead flashing replacement in Lowestoft typically costs £400-£1,200 depending on access, stack height, and extent of work. Replacing flaunching and a chimney pot can add £150-£350. We always provide a written quote before starting, and the price includes scaffold where required.
There is no single price because the cost depends on the extent of the damage, the type of roof, and whether scaffolding is needed for safe access. A minor repair to replace a few slipped slates on an accessible roof will cost significantly less than repairing storm damage to a ridge line that requires a full scaffold. The only way to get an accurate figure is to have the roof inspected first.
For non-emergency leaks we arrange an inspection at a time that suits you, and smaller repairs can often be completed on the same visit. If you have active water ingress causing damage inside your home, call us and explain what is happening.
Other services

More from Lowestoft Roofers